Here's where you can keep tabs on what's currently on the bench being developed !
Think of this amp as a marriage between our Gypsy and Moosette. Utilizing the single KT88 output from the Gypsy and the preamp from the Moosette, this amp will deliver 30 watts with reverb. Short and long tanks are available to suit any players taste.
What could be better than our Gypsy? Double KT88 output tubes for twice the power!
This combo will be as minimalist as we dare! Featuring "Volume", 6 position "Voice" and "Edge" controls and putting out around 5 to 8 watts into a 10" Alnico speaker in an open backed design. The Redpoll will give you extremely flexible voicing in a small wattage, moderate gain amp suitable for the living room, practice studio or for recording. We plan to offer the Redpoll with either a 6V6 or EL84 output option. The preamp is built around a single ECC83S and the amp will use a tube rectifier.
This will be our first stand alone guitar effect ! It will feature an all-tube, transformer driven reverb and tube driven Tremolo circuit that can be patched into the Swampdonkey M50 Auxiliary loop or used between your guitar and any amp.
Hi gain preamp designed specifically for Hard Rock and Metal players. This will be a stand alone effect that offers huge gain with a clean signal parallel mix and dynamic feedback loop. The EQ configuration is undecided so far. Check back with us for details!
The HR50 design picks up where the M50 leaves off by offering 2 channels. Channel one will be dedicated to the M50's clean tones and channel two will offer the extreme high gain preamp mentioned above. Output tubes available will be your choice of either 6L6GC, 6V6S, EL34 or KT66.
Other preamp configurations are being developed for the M50 platform including an 80 to 100 watt output option. Signature versions are available NOW.
A vintage inspired cathode biased push-pull amp featuring reverb and tremolo !
There are many other designs still on the drawing board. We welcome your input on any of our current or future amplifiers. We would also like to meet your needs for bass guitar, steel guitar and other instruments. Just drop us a line and ask!